3M
™
Streaming Projector SPR1000
© 2012 3M. All Rights Reserved.
47
En
glish
Focusing the Image
The image is blurry.
•
Use the focus wheel on the side of the projector (next to the lens) to sharpen the
image.
•
Reduce the input resolution. The native resolution of the projector is 480p.
Therefore, resolutions greater that 720p may appear blurry.
•
If you are closer to the projected image than the projector, you might be seeing
the individual pixels that make up the image. Reduce the size of the image or
move away from the image.
The image is too dim.
•
Reduce the image size and/or decrease (darken) the room lighting.
The image seems bright enough but there are no details in the dark shadows.
•
Open the projector menu and increase the brightness setting and then decrease
the contrast slightly.
The image seems bright enough but there are no details in the highlights.
•
Open the projector menu and decrease the contrast.
Adjusting the Volume
There is no audio coming out of the speaker.
•
Turn up the volume or turn off mute.
