3M™ Streaming Projector SPR1000
24
© 2012 3M. All Rights Reserved.
En
gl
ish
Turning the Lamp On and Off:
You can turn the projector's lamp off without turning
the projector off by pressing the lamp button on the remote control. The projector lamp
will turn off immediately while the cooling fans continue to run.
While the projector's lamp is off, the status indicator remains green. This tells you that
the lamp is off but the projector is still on. Press Lamp On/Off button on the remote
again and the lamp will turn on.
Important Note: Even though the lamp is off, the projector continues to use a
power and generate heat. The projector will turn off if it overheats or loses battery
power. You can prevent the projector from turning off by keeping the air vents
clear and plugging it into the power adapter.
Status Indicator Light
The status indicator light provides information about the projector’s power, battery, and
error status.
Status Indicator Light
Meaning
Solid amber
The projector is charging.
Solid green
The projector is on.
Flashing green
The projector is finished charging.
Flashing amber
The projector has overheated.
Flashing red
The battery power is low.
