3M
™
Streaming Projector SPR1000
© 2012 3M. All Rights Reserved.
23
En
glish
Battery Maintenance Tips:
•
Charge and discharge the battery by turning on the projector at least once a
month.
•
When storing the projector for more than a month, store it at 50% charge.
•
The battery is at 50% charge when half of the battery icon is white.
•
Do not store the projector when it is fully discharged. It will lose the ability to
charge.
Turning the Projector on and off
When you first pull the projector out of the box, you can only use the power button
on the projector to turn it on. After the projector is turned on for th first time, you can
turn it on or off using the power button on either the remote or projector.
MHL-enabled devices such as the Roku Streaming stick receive power from the
projector. You can turn off the projector's lamp without turning off the MHL-enabled
device using the remote control.
Turning the Projector On:
Press the power button on the projector or remote control.
Note: Some devices that receive their power from the projector might take 30
seconds or more to become ready to use.
Turning the Projector Off:
Press and hold the power button until the projector turns
off.
