3M
™
Streaming Projector SPR1000
© 2012 3M. All Rights Reserved.
43
En
glish
Reset Button
The reset button restarts the projector in the event the projector stops responding.
Reset the projector by disconnecting the video input and power, and then press the
reset button using an uncoiled paper clip. This will turn off the projector and allow you
to turn the projector on again.
Reset button
Cleaning the Projector
1
Turn off the projector and disconnect power and other cables.
2
Use a soft cloth, such as the 3M™ High Performance Cleaning Cloth, to wipe
off dust. If the dust is difficult to remove, dampen the cloth with clean water and
then wipe the projector clean. Then use a clean cloth to dry the projector.
Important Note: Do not use cleaning chemicals or solvents to clean the projector.
Cleaning chemicals and solvents may cause the plastic parts to discolor.