3M
™
Streaming Projector SPR1000
© 2012 3M. All Rights Reserved.
45
En
glish
The cover does not close properly.
•
There is tongue on the bottom corner of the cover. Make sure the tongue inserts
into the groove on the projector and the rest of the cover snaps into place.
Turning the Projector On or Off
The projector will not turn on.
•
The battery is not charged. Plug the power adapter into the projector and try
again.
The projector button panel is on but the projector is not projecting an image.
•
The video source (such as the Roku Stick) is outputting a black image. First, try
removing the Roku Streaming Stick or disconnect the video cable. Do you see the
3M logo screen? If not, try turning off the projector and turning it on again. If you
still do not see a 3M Logo screen while the status indicator is green, contact 3M
for additional support.
•
The Lamp is off. Press the Lamp ON/Off button on the remote control.
The remote control will not turn on the projector.
•
When the projector is new and never been turned on, you must use the power
button on the projector. Now you can turn on the projector by pressing the power
button on the projector or the remote control.
