Rohde & Schwarz TSME, Руководство пользователя

Страница: 37 / 75

Preparing for Use
R&S
®
TSME
35 User Manual 1514.6542.02 ─ 10
c) Depending on which application is used, also select the following items:
● R &S ROMES :
– ROMES.exe
– Dll Loader for PHYLIS Modules
(in the ROMES application folder)
● R&S NESTOR :
– RohdeSchwarz.Nestor.exe
–
● R&S ViCom :
(User-specific) ViCom executable file
4. The application checks which firmware versions are installed on the R&S TSME
and which version was used to boot the R&S TSME. Up to three firmware versions
can be stored on the R&S TSME.
The following procedure depends on the detected version(s).
● If the firmware version required by the application was used for booting, the
application establishes a connection to the R&S TSME directly.
● If the firmware version required by the application is available on the
R&S TSME, but was not used for booting, the application reboots the
R&S TSME using the required firmware version. Then the application estab-
lishes a connection to the R&S TSME.
● If the firmware version required by the application is not yet available on the
R&S TSME, the application uploads the required firmware version to the
R&S TSME (this may take about one minute). The application reboots the
R&S TSME using the required firmware version, then establishes a connection
to the R&S TSME.
● If the firmware version required by the application is not yet available on the
R&S TSME, and all three storage spaces for firmware are occupied by other
versions, the application must do the following:
a) Clear all storage space for firmware versions on the R&S TSME (this may take
about one minute).
b) Upload the required firmware version to the R&S TSME (this may take about
one minute).
c) Reboot the R&S TSME using the required firmware version.
d) Establish a connection to the R&S TSME.
2.5 Checking the Instrument
The R&S TSME provides an application named R&S TSME Device Manager to check
the state of the instrument. Operation and maintenance can also be performed using
this tool. See
Chapter 4.1, "The R&S TSME Device Manager" , on page 41 for details.
Checking the Instrument