Rohde & Schwarz TSME, Руководство пользователя

Страница: 34 / 75

Preparing for Use
R&S
®
TSME
32 User Manual 1514.6542.02 ─ 10
Figure 2-9: Configuration for LTE MIMO setup with four R&S TSMEs and a switch
To configure multiple R&S TSMEs connected to one host PC using a switch
1. Set up the LAN interface on the PC to use the following network settings, as
described in Chapter 2.2.2.1, "Configuring the LAN Interface on the Host PC" ,
on page 19:
● IP address : 192.168.0.1
● Subnet mask : 255.255.255.0
2. Change the IP addresses of the R&S TSMEs, as described in Chapter 4.3,
"Changing the IP Address for Multiple R&S TSME Configuration" , on page 45.
a) Start the R&S TSME Device Manager.
b) Connect the first R&S TSME to the PC.
c) Define the IP address: 192.168.0.2 (default).
d) Connect the second R&S TSME to the PC.
e) Define the IP address: 192.168.0.3 .
f) Connect the third R&S TSME to the PC.
g) Define the IP address: 192.168.0.4 .
h) Connect the fourth R&S TSME to the PC.
i) Define the IP address: 192.168.0.5 .
Connecting the R&S TSME