manualshive.com logo in svg

Rohde & Schwarz R&S RTM-B1, Руководство пользователя

Поделиться
Скачать
Rohde & Schwarz R&S RTM-B1 Скачать руководство пользователя страница 219

Documenting Results

R&S

®

RTM3000

219

User Manual 1335.9090.02 ─ 08

To configure screenshots:

1. Press the [Save Load] key.

2. Select "Screenshots".

3. Adjust the target directory ("Destination"), filename, format, and color mode.

You can save the current display with "Save", or close the dialog box. The screen-
shot settings are saved and applied when you create screenshots with the 

 key.

Destination

The destination 

/USB_FRONT

 is only active, if a USB flash drive is connected to the

front USB port.

Tap and select the target folder. Tap "Accept Dir." to confirm selection. Existing files in
the selected folder are listed and can be deleted here.

Remote command: 

MMEMory:CDIRectory

 

on page 579

File Name

Specifies the name of the file to be saved. The default is 

SCR01

 or a higher number,

depending on existing files in the target directory.

Remote command: 

MMEMory:NAME

 

on page 576

Format

Selects the file format.

●

"BMP": Bitmap is an uncompressed format, files are large and saving can take
some time.

●

"PNG": Portable Network Graphics is a graphic format with lossless data compres-
sion.

Remote command: 

HCOPy:FORMat

 

on page 577

Screenshots

www.allice.de

Allice Messtechnik GmbH

Содержание R&S RTM-B1























































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды