manualshive.com logo in svg

Rohde & Schwarz R&S RTM-B1, Руководство пользователя

Поделиться
Скачать
Rohde & Schwarz R&S RTM-B1 Скачать руководство пользователя страница 206

Applications

R&S

®

RTM3000

206

User Manual 1335.9090.02 ─ 08

4. Set the amplitude for the measurement.

5. If necessary, open the "Setup" dialog to refine the settings:

a) Set an "Amplitude Profile" for systems with sensitive circuits.
b) Set the "Maximum Phase" of the system.
c) Set a "Meas. Delay" for systems that need more time to adapt to a new fre-

quency.

6. Press "Run" to start the measurement.

7. If necessary, press "Save" to save the measurement results to a file.

8.8.3

 

Bode Plot Window Controls

The Bode plot window provides the most important function to set up the plot and to
run the test.

Start

Sets the start frequency of the sweep for the Bode plot.

Remote command: 

BPLot:FREQuency:STARt

 

on page 557

Stop

Sets the stop frequency of the sweep for the Bode plot.

Remote command: 

BPLot:FREQuency:STOP

 

on page 557

Points

Selects the number of points per decade that are measured from a predefined list. You
can also set a different value from the predefined ones in the "Setup" menu.

Gen

Enables the in-build generator. This allows you to start a frequency sweep for a defined
frequency range.

Ampl.

Sets a fixed amplitude.

Input

Selects the channel for the input signal of the DUT.

Remote command: 

BPLot:INPut[:SOURce]

 

on page 557

Bode Plot (Option R&S

 

RTM-K36)

www.allice.de

Allice Messtechnik GmbH

Содержание R&S RTM-B1























































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды