manualshive.com logo in svg

Rohde & Schwarz R&S RTB2000, Руководство пользователя, Страница: 372 / 609

Поделиться
Скачать
Rohde & Schwarz R&S RTB2000 Скачать руководство пользователя страница 372

Remote control commands

R&S

®

RTB2000

372

User Manual 1333.1611.02 ─ 11

Parameters:

<RecordLength>

Record length in Samples.
If the entered value differs from the predefined values, the
instrument sets the closest value.

Manual operation: 

See 

"Record Length"

 

on page 67

See 

"Record Length"

 

on page 109

ACQuire:NSINgle:COUNt 

<NSingleCount>

Sets the number of waveforms acquired with 

RUNSingle

.

Parameters:

<NSingleCount>

Number of waveforms.
Range: 

1 to maximum number that depends on the record
length.

*RST: 

1

Manual operation: 

See 

"Nx Single"

 

on page 69

ACQuire:AVAilable?

Returns the number of segments that are currently saved in the memory. This number
is available for history viewing.

Parameters:

<Acquisitions>

Number of captured segments

Usage: 

Query only

ACQuire:SEGMented:STATe 

<State>

If ON, the acquisitions are performed as fast as possible, without processing and dis-
playing the waveforms. When acquisition has been stopped, the data is processed and
the latest waveform is displayed. Older waveforms are stored in segments. You can
display and analyze the segments using the history..

Parameters:

<State>

ON | OFF

Manual operation: 

See 

"Fast Segmentation"

 

on page 110

ACQuire:AVERage:CURRent?

Returns the current amount of acquired waveforms that contribute to the average. The
value is independent of the number of available segments, there are more waveforms
in the average available than segments in history.

Parameters:

<CurrentAverages>

Range: 

Minimum is 2; maximum depends on the instrument
settings.

Waveform analysis

Содержание R&S RTB2000


































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов