manualshive.com logo in svg

Rohde & Schwarz R&S RTB2000, Руководство пользователя

Поделиться
Скачать
Rohde & Schwarz R&S RTB2000 Скачать руководство пользователя страница 115

Waveform analysis

R&S

®

RTB2000

115

User Manual 1333.1611.02 ─ 11

The data files contain the time and voltage data of the samples. If you save all visible
channels, the voltages of all channels are written into one file.

Figure 6-10: Content of a history segment file, two channels are saved

In addition to the data files, an index file is written. The index file delivers information
on the files and the segments. For each segment, the segment index, save date and
time, and the filename is listed.

Figure 6-11: Content of a history index file

6.5

 

Search

6.5.1

 

Search conditions and results

The search functions of R&S

 

RTB2000 can find all edges, pulse widths, peaks, or

other events in an acquisition that match the search conditions. For each search type,
specific settings are available. Searches can be performed on channel, math or refer-
ence waveforms, available sources depend on the search type.

To configure the search

1. Press the [Search] key.

2. Select the waveform that you want to search for events: "Source".

3. Select the event type that you want to find: "Search Type".

Search

Содержание R&S RTB2000


































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды