manualshive.com logo in svg

Rohde & Schwarz R&S FSV, Быстрый старт

Поделиться
Скачать
Rohde & Schwarz R&S FSV Скачать руководство пользователя страница 97

Preparing for Use

R&S

®

 FSVA/FSV

74

Quick Start Guide 1321.3066.02 ─ 05

3. Press the "GPIB" softkey.

The submenu for setting the parameters of the remote control interface is dis-
played.

Setting the GPIB address

► In the "GPIB" menu, press the "GPIB Address" softkey.

The edit dialog box for the GPIB address is displayed. The setting range is
from 0 to 30. If SCPI is selected as the GPIB language, the default address is
20.

Remote command:

SYST:COMM:GPIB:ADDR 20

Setting the default ID response string

► In the "GPIB" menu, press the "ID String Factory" softkey to select the default

response to the 

*IDN?

 command.

Setting a user-defined ID response string

► In the "GPIB" menu, press the "ID String User" softkey to enter a user-defined

response to the 

*IDN?

 command. The maximum length of the output string is

36 characters.

Configuring the GPIB Interface

Содержание R&S FSV



















































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды