manualshive.com logo in svg

Rohde & Schwarz R&S FSV, Быстрый старт

Поделиться
Скачать
Rohde & Schwarz R&S FSV Скачать руководство пользователя страница 68

Preparing for Use

R&S

®

 FSVA/FSV

45

Quick Start Guide 1321.3066.02 ─ 05

When a USB device is then disconnected from the R&S

 

FSVA/FSV, Windows

immediately detects the change in hardware configuration and deactivates the
corresponding driver.

All USB devices can be connected to or disconnected from the instrument during
operation.

Connecting a memory stick or CD-ROM drive

If installation of a memory stick or CD-ROM drive is successful, Windows informs
you that the device is ready to use. The device is made available as a new drive
and is displayed in Windows Explorer. The name of the drive depends on the
manufacturer.

Connecting a keyboard

The keyboard is detected automatically when it is connected. The default input
language is English – US.

Select "Start > Control Panel > Clock, Language, and Region > Change key-
boards or other input methods" to configure the keyboard properties. To access
the Windows operating system, press the Windows key on the external keyboard.

Connecting a mouse

The mouse is detected automatically when it is connected.

Select "Start > Control Panel > Devices and Printers > Mouse" to configure the
mouse properties. To access the Windows operating system, press the Windows
key on the external keyboard.

Connecting a printer

When printing a file, the instrument checks whether a printer is connected and
turned on and whether the appropriate printer driver is installed. If required,
printer driver installation is initiated. A printer driver only needs to be installed
once.

To install a printer, select "Start > Control Panel > Devices and Printers > Add a
printer". To access the Windows operating system, press the Windows key on the
external keyboard.

You can load updated and improved driver versions or new drivers from an instal-
lation disk, USB memory stick or another external storage medium. If the instru-

Connecting USB Devices

Содержание R&S FSV



















































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды