manualshive.com logo in svg

Rohde & Schwarz R&S FSV, Быстрый старт

Поделиться
Скачать
Rohde & Schwarz R&S FSV Скачать руководство пользователя страница 163

Basic Measurement Examples

R&S

®

 FSVA/FSV

140

Quick Start Guide 1321.3066.02 ─ 05

6.5

Storing and Loading Instrument Settings

The R&S

 

FSVA/FSV can store complete instrument settings together with instru-

ment configurations and measurement data in a settings file. The data is stored
on the built-in hard disk or - if selected - on a USB device (e.g. memory stick) or
on a network drive. The hard disk has the drive letter 

C:

.

In the default state, the current settings are stored. This includes the settings of
the measurement functions, the activated limit lines and the active transducer fac-
tor.

6.5.1

Storing an Instrument Configuration (without Traces)

1. Press the SAVE/RCL key.

2. Press the "Save" softkey.

The dialog box for instrument configurations is displayed. The 

File Name

field is in edit mode and contains a suggestion for a new name.

3. To change the suggested name, enter a name for the settings file to be

stored.

 

 

Storing and Loading Instrument Settings

Содержание R&S FSV



















































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды