manualshive.com logo in svg

Rohde & Schwarz R&S FSV, Быстрый старт

Поделиться
Скачать
Rohde & Schwarz R&S FSV Скачать руководство пользователя страница 90

Preparing for Use

R&S

®

 FSVA/FSV

67

Quick Start Guide 1321.3066.02 ─ 05

The serial number can be found on the rear panel of the instrument. It is the third
part of the device ID printed on the bar code sticker:

For example, FSV4-123456

To change the computer name

1. Press the SETUP key and select "General setup" > "Computer name".

The current computer name is displayed here.

2. Enter the new computer name and confirm the entry.

3.6.4

Changing the Windows Firewall Settings

A firewall protects an instrument by preventing unauthorized users from gaining
access to it through a network. Rohde & Schwarz highly recommends the use of
the firewall on your instrument. Rohde & Schwarz instruments are shipped with
the Windows firewall enabled and preconfigured in such a way that all ports and
connections for remote control are enabled.

For details and recommendations, see the Rohde & Schwarz White Paper

1EF96: Malware Protection Windows 10

Note that changing firewall settings requires administrator rights.

3.7

LXI Configuration

LAN eXtensions for Instrumentation (LXI) is an instrumentation platform for mea-
suring instruments and test systems that is based on standard Ethernet technol-
ogy. LXI is intended to be the LAN-based successor to GPIB, combining the
advantages of Ethernet with the simplicity and familiarity of GPIB.

 

 

LXI Configuration

Содержание R&S FSV



















































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды