Rohde & Schwarz OSP-B200S2, Руководство пользователя

Страница: 48 / 327

Getting Started
R&S
®
OSP
48 User Manual 1178.7100.02 ─ 05
Module name Order no. Width
(number
of slots)
Suited for integration into Requires
opening
the switch
unit
Number
of mod-
ule bus
cables 1
OSP
220
OSP
230
OSP
320
OSP-
B200S2
R&S OSP-B123 1515.5527.02 2 yes no yes no 2
R&S OSP-B124 1515.5533.02 2 yes no yes no 1
R&S OSP-B125 1515.5540.02 3 yes
yes 5
no no 2
R&S OSP-B125E 1515.5540.26 3 yes
yes 5
no no 2
R&S OSP-B125H 1515.5540.40 3 yes
yes
5 no no 2
R&S OSP-B126 1515.5556.02 3 yes
yes 5
no no 2
R&S OSP-B127 1505.4728.02 1 yes no 1
R&S OSP-B128 1505.4734.11 / .12 / .13 1 yes no 1
R&S OSP-B129 1517.7004.02 1 yes no 1
R&S OSP-B129E 1517.7004.26 1 yes no 1
R&S OSP-B131 1505.4740.02 1 yes no 1
R&S OSP-B132 1505.4757.02 2 yes no yes no 2
R&S OSP-B133 1528.3157.02 1 yes no 1
R&S OSP-B136 1522.4500.02 1 yes no 1
R&S OSP-B142 1505.4792.03 / .11 / .12 / .13 1 yes no 1
R&S OSP-B171H 1528.1577.42 / .44 1 yes no 1
R&S OSP-B200R 1528.3140.02 / .04 1 yes no
no 6 up to 2 7
R&S OSP-PM-I 1515.5985.02 1 yes no no 0
(1) Number of module bus cables (26-pin flat-ribbon cables) required for controlling this module.
(2) Let Rohde & Schwarz service mount the feedthrough panels , as it requires opening the switch unit's casing, to feed the also
required RF cables across the switch unit, and to fix the cables.
(3) Let Rohde & Schwarz service mount the module R&S OSP-B104 into the R&S OSP320, as it requires opening the switch unit's
casing to fix the module with an additional mounting kit (included in the delivery). Mounting this module also requires connecting an
additional power supply cable inside the switch unit's casing.
(4) Let Rohde & Schwarz service personnel mount this module, as it requires opening the switch unit's casing to fix the module.
Mounting the module R&S OSP-B104 also requires connecting an additional power supply cable inside the switch unit's casing.
(5) In the R&S OSP230, you can install a three-slot (triple-width) module only in the rear side.
(6) For connecting 2 module bus cables to the R&S OSP-B200R, use also the module bus cable of a neighboring slot or let
Rohde & Schwarz service personnel mount this module (see "Limitations in module mounting" on page 42).
(7) Depending on the 1 or 2 switch modules that you want to connect to the R&S OSP-B200R, this remote-control module requires
1 or 2 module bus cables.
The touchscreen display module R&S OSP-B300M can only be factory-mounted by
Rohde & Schwarz.
Both the R&S OSP220 and the R&S OSP230 are equipped inside with 6 module bus
cables (flat-ribbon cables), hence, one per module slot (disregarding the touchscreen
Mounting a Module