manualshive.com logo in svg

Rohde & Schwarz NRP2, Руководство пользователя

Поделиться
Скачать
Rohde & Schwarz NRP2 Скачать руководство пользователя страница 329

Remote Control - Commands

NRP2

326

User Manual 1173.9140.02 ─ 07

SYSTem:SENSor<[1]..4>:INFO?

Returns information on a sensor. <string> is used to query a specific information item.
If called without parameters, the command returns all available information in the form
of a list of strings separated by commas. The permissible values for <string> depend
on the sensor. For details refer to the documentation of the corresponding sensor.

Parameters:

<string>

Range: 

depending on sensor

Usage: 

Query only

SYSTem:SENSor<[1]..4>:REBoot

Performs a power down reset of the selected sensor.

Usage: 

Event

SYSTem:SENSor<[1]..4>:RESet

From the point of view of the R&S

 

NRP2 base unit, the sensors are stand-alone mea-

suring devices. They communicate with the R&S

 

NRP2 via a command set complying

with SCPI.

SYST:SENS<[1].48>:RES

 prompts the base unit to send an 

*RST

 to the sensor in

question. Measurements in progress are interrupted.

Usage: 

Event

SYSTem:SENSor<[1]..4>:TEST?

Performs a sensor test and returns a list of strings separated by commas. The contents
of this test protocol is sensor-specific. For its meaning, please refer to the sensor docu-
mentation.

Usage: 

Query only

SYSTem:SPEed 

<state>

The data processing speed of the R&S

 

NRP2 can be increased when 

FAST

 is

selected. The display is switched off and the measured values are no longer displayed
since the continuous update of the screen content requires computation time.

Parameters:

<state>

NORMal | FAST
*RST: 

NORMal

SYSTem

北京海洋兴业科技股份有限公司（证券代码：839145）

                        电话：010-62176775

网址：www.hyxyyq.com

Содержание NRP2




































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды