Rohde & Schwarz NRP A Series, Начало работы

Страница: 27 / 52

Power sensor tour
R&S
®
NRP Series
27 Getting Started 1419.0170.02 ─ 18
4 Power sensor tour
This chapter provides an overview of the available connectors and LEDs of the
power sensor.
In the following figure, the USB power sensor is shown on the left, the LAN power
sensor is shown on the right.
HOST
INT
ER
FACE
IN:
3 V
or
5 V
logic
OU
T: min.
2 V
into
50
Ω
max.
5.3
V
TRIG2
I/0
PoE
SM
AR
T SENSOR
TECHNOLOGY
NRP
SM
AR
T SENSOR
TECHNOLOGY
NRP
1
1
4
2
2
3
3 4
8
5
6
7
Figure 4-1: NRP power sensors (example)
1 = RF connector, see Chapter 4.1, "RF connector" , on page 28
2 = Status LED, see Chapter 4.2, "Status information" , on page 30
3 = Host interface connector, see Chapter 4.3, "Host interface" , on page 30
4 = Trigger I/O connector, see Chapter 4.4, "Trigger I/O connector" , on page 30
5 = Network status LED, see "Network status LED" on page 31
6 = LAN reset button, see "LAN reset button" on page 31
7 = LAN connector, see Chapter 4.5, "LAN PoE interface" , on page 31
8 = Power over Ethernet status LED, see "Power over Ethernet status LED" on page 31