Safety and regulatory information
R&S
®
NRP Series
5
Getting Started 1419.0170.02 ─ 18
1
Safety and regulatory information
The product documentation helps you use the product safely and efficiently. Fol-
low the instructions provided here and in the following chapters.
Intended use
The power sensors are intended for accurate and uncomplicated power measure-
ments in production, R&D and calibration labs as well as for installation and main-
tenance tasks. The supported base units are listed in the data sheet. Observe the
operating conditions and performance limits stated in the data sheet.
Target audience
The target audience is developers and technicians. The required skills and expe-
rience in power measurements depend on the used operating concept.
The power sensors are suitable for numerous power measurement applications.
Their application depends on the power sensor type and the frequency range of
the power sensor. For details, see the user manual or the data sheet.
Where do I find safety information?
Safety information is part of the product documentation. It warns you of potential
dangers and gives instructions on how to prevent personal injury or damage
caused by dangerous situations. Safety information is provided as follows:
●
In
Chapter 1.1, "Safety instructions"
on page 5. The same information is
provided in many languages as printed "Safety Instructions". The printed
"Safety Instructions" are delivered with the product.
●
Throughout the documentation, safety instructions are provided when you
need to take care during setup or operation.
1.1
Safety instructions
Products from the Rohde
&
Schwarz group of companies are manufactured
according to the highest technical standards. To use the products safely, follow
the instructions provided here and in the product documentation. Keep the prod-
uct documentation nearby and offer it to other users.
Safety instructions
