Rohde & Schwarz NRP A Series, Начало работы

Страница: 37 / 52

Operating concepts
R&S
®
NRP Series
37 Getting Started 1419.0170.02 ─ 18
For details on how to find out the IP address or hostname, refer to Chap-
ter 3.7.3.4, "Assigning the IP address" , on page 25 and Chapter 3.7.3.3,
"Using hostnames" , on page 24.
The main dialog of the web user interface opens.
3. Select the "Continuous Average" tab and perform any necessary changes.
4. Press "Measurement > ON" to start the measurement.
For a detailed description of the web user interface, refer to the corresponding
chapter in the user manual.
5.3 Remote control
You can remote control the R&S NRP series power sensor easily. The change to
remote control occurs "on the fly" and has no influence on the manual operation.
Further information:
●
See the user manual for details.
●
Chapter 6, "Remote control interfaces and protocols" , on page 44
●
Chapter 3.7.1, "Computer" , on page 16
5.4 R&S NRPV
The R&S NRPV enables you to measure power in all available measurement
modes. Also, you can use up to four power sensors simultaneously.
R&S NRPV