Operating concepts
R&S
®
NRP Series
33
Getting Started 1419.0170.02 ─ 18
To obtain an R&S
NRP Toolkit for an operating system other than Microsoft Win-
dows, contact the Rohde & Schwarz customer support:
5.1.2
System requirements
Hardware requirements:
●
Desktop computer or laptop, or an Intel-based Apple Mac
●
LAN interface and equipment for setting up a LAN connection.
See
Chapter 3.7.3, "Using a LAN connection"
Supported Microsoft Windows versions:
●
Microsoft Windows Vista 32/64-bit
●
Microsoft Windows 7 32/64-bit
●
Microsoft Windows 8/ 8.1 32/64-bit
●
Microsoft Windows 10 32/64-bit
5.1.3
R&S
NRP Toolkit for Windows
The R&S
NRP Toolkit installer for Windows-based systems contains the compo-
nents described in the release notes available at
To install the R&S
NRP Toolkit
1. Start the R&S
NRP Toolkit installer on the Windows-based computer.
In the "NRP-Toolkit Setup" dialog, the correct R&S
NRP Toolkit version for
your operating system, 32-bit or 64-bit, is already selected.
2. Enable the components you want to install.
● "NRP-Toolkit (SDK)"
The software development kit (SDK) provides programming examples for
the R&S
power sensors.
● "IVI Shared Components"
Installs the USBTMC driver. Enabled by default because the installation is
recommended.
See also
R&S
NRP Toolkit
