Setting Up the R&S
SFE100
R&S
®
SFE100
14
Getting Started 2112.4122.62 ─ 13
4 Setting Up the R&S
SFE100
Risk of injuries
To avoid injuries to yourself or others, always follow the instructions provided in the fol-
lowing chapters. Furthermore, observe the general safety instructions at the beginning
of this manual.
4.1 Unpacking the R&S
SFE100
The R&S
SFE100 is shipped together with its mandatory accessories in a cardboard
box.
4.1.1 Inspecting for Shipping Damage
Check the following. If anything is damaged, immediately notify the carrier.
1. Check the shipping container and cushioning material for damage.
2. Unpack the cardboard box (see
Chapter 4.1, "Unpacking the R&S
on page 14) and check the housing and handle for visible damages or loose parts.
4.1.2 Unpacking the Cardboard Box
Proceed as follows:
1. Open the cardboard box.
2. Remove the accessories packed into the box.
3. Take the R&S
SFE100 out of the packaging.
4. Remove the shock protectors attached to the R&S
SFE100.
Retain the original packing material. If the R&S
SFE100 needs to be transported or
shipped at a later date, you can use the material to prevent control elements and con-
nectors from being damaged. Rohde & Schwarz will only accept claims of warranty if
the R&S
SFE100 is shipped with sufficient packaging.
Unpacking the R&S
SFE100
