Interference Analyzer
R&S
®
Cable Rider ZPH
305
User Manual 1321.0950.02 ─ 07
The R&S Cable Rider ZPH opens a submenu to select the measurement mode.
3. Select the "Traingulation" mode.
The R&S Cable Rider ZPH enters the triangulation measurement mode.
4. Select the "Settings" softkey.
5. Select the "GPS Settings" softkey.
The R&S Cable Rider ZPH opens a submenu to select the different GPS settings.
6. Enable or disable the GPS or compass setting associated with the antenna type.
The currently selected antenna model is displayed in the
title bar
. The color of the label
indicates the state of the satellite lock of the GPS receiver of the antenna model.
For more information on the GPS receiver states,
"Displaying GPS information"
on page 46.
13.3.4.2
Using an Audio Signal to Locate Interferers
You can configure the R&S Cable Rider ZPH to play back an audio signal when it
receives a signal. The audio signal changes its volume and frequency, depending on
the strength of the received signal.
1. Press the [MEAS] key.
2. Select the "Settings" softkey.
3. Select the "Tone" softkey.
The R&S Cable Rider ZPH opens a submenu to select the different tone parame-
ters settings.
4. Select the "Tone" checkbox.
The R&S Cable Rider ZPH turns on the audio signal.
The R&S Cable Rider ZPH allows you to define various aspects of this audio signal.
Defining a squelch level
The squelch level defines the signal level above which the audio signal starts to play.
1. Press the [MEAS] key.
2. Select the "Settings" softkey.
3. Select the "Squelch Level" softkey.
The R&S Cable Rider ZPH opens an input field to define the squelch level.
4. Enter a squelch level in dBm.
The R&S Cable Rider ZPH displays the squelch level graphically in the power bar
element of the user interface.
Working with Maps
