EN
55
Password
Setting a password prevents unauthorised persons from accessing the settings.
With password protection active (
&3
=
), parameters may be viewed, but the values CANNOT be modi
ƼIH
Only a single password is used to control access to the gate automation system.
WARNING:
Contact the Technical Support Service if you lose your password.
3
3
3
3
Password activation procedure:
• Enter the desired values for parameters
3
,
3
,
3
and
3
.
• Use the UP
a
ERHSV(3;2
b
buttons to view the parameter
&3
.
• Press and hold the
ERHFYXXSRWJSVWIGSRHW
•
8LIHMWTPE]ƽEWLIWXSGSRƼVQXLEXXLITEWW[SVHLEWFIIRWEZIH
• Switch the control unit off and on again. Check that password protection is activated (
&3
=
).
Temporary unlock procedure:
• Enter the password.
• Check that
&3
=
.
Password cancellation procedure:
• Enter the password (
&3
=
).
• Save the values
3
,
3
,
3
,
3
=
• Use the UP
a
ERHSV(3;2
b
buttons to view the parameter
&3
.
• Press and hold the
+
and
-
buttons for 4 seconds.
•
8LIHMWTPE]ƽEWLIWXSGSRƼVQXLEXXLITEWW[SVHLEWFIIRGERGIPPIHXLIZEPYIW
3
,
3
,
3
and
3
indicate that no password is set).
• Switch the control unit off and on again (
&3
=
).
&3
Changing password
Protection deactivated.
Protection activated.
