EN
48
D
4VIƽEWLMRK
(MWEFPIH8LIƽEWLMRKPMKLXMWEGXMZEXIHHYVMRKSTIRMRKERHGPSWMRKQERSIYZVIW
Flashing warning signal for 1 to 10 seconds prior to every manoeuvre.
WIGSRHƽEWLMRK[EVRMRKWMKREPTVMSVXSGPSWMRKQERSIYZVI
D
Condominium function for partial open command (PED)
(MWEFPIH8LIKEXISTIRWTEVXMEPP]MRWXITQSHISTIRWXSTGPSWIWXSTSTIR
Enabled. Partial commands are ignored during gate opening.
D
Enabling operator present function
Disabled.
)REFPIH8LISTIR%4SVGPSWI',FYXXSRQYWXFITVIWWIHGSRXMRYSYWP]XSSTIVEXIXLIKEXI8LIKEXI
stops when the button is released.
D
Gate open indicator / photocell test function and “battery saving”
The indicator is off when the gate is closed, and steadily lit during manoeuvres and when the gate is
open.
8LIMRHMGEXSVƽEWLIWWPS[P]HYVMRKSTIRMRKQERSIYZVIWERHMWPMXWXIEHMP][LIRXLIKEXIMWGSQTPIXIP]
STIR-XƽEWLIWUYMGOP]HYVMRKGPSWMRKQERSIYZVIW
If the gate is stopped in an intermediate position, the lamp extinguishes twice every 15 seconds.
Set
if the output
SC
MWYWIHJSVXLITLSXSGIPPXIWX7IIƼK
Set to
if the output
SC
MWYWIHJSVXLIƈFEXXIV]WEZMRKƉJYRGXMSR7IIƼK
When the gate is completely open or closed, the control unit deactivates any accessories connected to
terminal
SC
to reduce battery consumption.
Set to
if the output
SC
MWYWIHJSVXLIƈFEXXIV]WEZMRKƉJYRGXMSRERHTLSXSGIPPXIWXJYRGXMSR7IIƼK
5.
Setting deceleration MOTOR 1
Setting deceleration MOTOR 2
01= the gate decelerates near stops and the limit switch (if installed).
...
05= the gate decelerates long before stops and the limit switch (if installed).
Adjusting LEAF 1 position control when completely opens or closes
8LIZEPYIWIPIGXIHQYWXIRWYVIXLEX0)%*MWSTIRIHGPSWIHGSVVIGXP][LIRMXVIEGLIWXLIVIWTIGXMZI
(open or closed) mechanical stop. The position of LEAF 1 is calculated by the system from the number
of motor revolutions and the motor reduction gear ratio.
Warning
)\GIWWMZIP]PS[ZEPYIWGEYWIXLIKEXIXSVIZIVWI[LIRMXVIEGLIWXLIKEXISTIRGPSWIHWXST
N.B.
: with
BR21
automation systems, with the gate leaf in the completely closed position, adjust the
inner mechanical stop so that the lever of the gear motor can move by a few millimetres.
Adjusting LEAF 2 position control when completely opens or closes
8LIZEPYIWIPIGXIHQYWXIRWYVIXLEX0)%*MWSTIRIHGPSWIHGSVVIGXP][LIRMXVIEGLIWXLIVIWTIGXMZI
(open or closed) mechanical stop. The position of LEAF 2 is calculated by the system from the number
of motor revolutions and the motor reduction gear ratio.
Warning
)\GIWWMZIP]PS[ZEPYIWGEYWIXLIKEXIXSVIZIVWI[LIRMXVIEGLIWXLIKEXISTIRGPSWIHWXST
N.B.
: with
BR21
automation systems, with the gate leaf in the completely closed position, adjust the
inner mechanical stop so that the lever of the gear motor can move by a few millimetres.
Motor revolutions.
Partial opening adjustment (%)
N.B.
: with double leaf swing gate installations, this parameter is set by default as the completely open
position of LEAF 1.
With single leaf swing gate installations, this parameter is set to 50% of total opening.
From 15% to 99% of total gate travel.
