User Manual – EC II GSM SE
29
the alarm is acknowledged LED C LED´s becomes green. In the Speech Unit the yellow LED
is switched off and a second LED to the right becomes green. This flashing sequence is ac-
cording to EN81:70.
There is an option to change to a flashing sequence in the Speech Unit which indicates a reg-
istered alarm using only the right LED. It first starts to flash with green light and when the
alarm is acknowledged it becomes fixed green. This is done with the following programming
sequence:
Return to the yellow/green sequence by programming:
8.4.14 Stop sending battery alarm
If you by some reason do not want battery alarm to be called out this can be done by entering
the following programming sequence:
Battery alarms are again allowed by programming:
Note that battery alarm always should be allowed to be called out since the product does not
work in case of power failure if the battery is damaged or not mounted. Even if the product is
not allowed to call out battery alarm the LED will still indicate any eventual battery alarm.
8.4.15 Relay control
Default the relay in the central unit is activated if any of the alarm buttons are activated. It is
possible to remotely activate the relay for 5 seconds by pressing
DTMF 9
on the receiving
telephone. To remotely control the relay the following programming sequence is used:
To return to controlling the relay when activating any of the alarm buttons, program the follow-
ing:
8.4.16 End-of-alarm
Note that an End-of-alarm can be generated with any of the following methods:
1. Use the magnetic switch hidden under the front plate. See section 8.4.17 below.
2. Use one of the two alarm button inputs and program the correct alarm type. See sec-
tion 8.4.11 above
3. Use the programming sequence described below
To inform the rescue service that the alarm has been dealt with and no more passengers are
trapped in the lift it is possible send a message to the alarm central. The alarm is initiated
when programming the following programming sequence:
Содержание EC II GSM SE
Страница 1: ...EC II GSM SE User Manual...
