Rocom EC II GSM SE, Руководство пользователя

Страница: 22 / 50

User Manual – EC II GSM SE 22
8.1 Check list before start up and programming
1. A speech unit is connected to the central unit
2. An alarm button is connected to the speech unit or to the central unit. As an alterna-
tive a speech unit with integrated alarm button can be used
3. All jumpers are mounted to the non used alarm button inputs
4. The battery is mounted and both battery cables are connected to the battery
5. A SIM-card is mounted according to instructions in section 6.1.1 above
If other equipments will be used such as loop amplifier, emergency light, telephone handset
for intercom, etc, they must also be connected to the central unit before power is connected.
6. Connect external power to the central unit.
8.2 Setup of programming mode
Before EC II GSM SE can be programmed it must be set to programming mode.
Press the button
for three seconds to enter programming mode
The programming mode is automatically disconnected after 30 seconds if no key is pressed.
It is possible to manually exit the programming mode by pressing:
8.3 Standard functions which must be programmed
Below follows a description of the most frequent programming sequences which is used to
program the EC II GSM SE. A number of optional functions are presented in the following
section.
8.3.1 Programming of PIN code
In order to be able to connect to the GSM network the PIN code of the SIM card must be pro-
grammed.
Programming the PIN code is done with the programming sequence:
<PIN code>
Where
<PIN code>
correspond to the PIN code of the SIM card.
The following must be checked before the power is connected to the central unit!
When external power is connected LED A becomes green. For more information
regarding the other LED´s, see section 13
If the SIM card has no PIN code activated this step is skipped
An active programming mode is indicated by a 4-tone from the loudspeaker of the
speech unit and a flashing red/green LED both from the speech unit and central
units. The flashing continues as long as EC II GSM SE is in programming mode