Rocom EC II GSM SE, Руководство пользователя

Страница: 25 / 50

User Manual – EC II GSM SE 25
The first regular test alarm calls 5 minutes after completion of programming mode. After that
the next test alarm calls after 10 hours and then next test alarm calls out after programmed
test interval. The delay in 10 hours is there to move test alarm calls to the evening when the
tariff usually is lower than daytime.
Test the test alarm function, by in programming mode enter:
Programming mode is completed automatically and the EC II GSM SE sends immediately to
the test alarm receiver. Note that the test alarm is not speech connected. To check if the test
alarm has reached the receiver you must contact the alarm centre.
Push following sequence to disable automatically test alarm:
The test alarm is sent out even if battery alarm is active and during battery operation. If a test
alarm fails, next the attempt will be made after 10 minutes. Totally 10 attempts will be made.
8.4.2 Change delay time for alarm button
You can change the time that the alarm button must be pressed down before an alarm is acti-
vated. The default time is 5 seconds, but this time may be changed between 1 and 30 sec-
onds. Note that the selected time must always be shorter than the time posted next to the
alarm button in the lift car. The delay is selected with:
<Time in seconds 1-30>
The time delay does not include other connected alarm buttons (ALBU 1 and ALBU 2) but for
them the alarm calls out immediately at activation.
8.4.3 Answer function
It is possible to call EC II GSM SE to talk with the person who is in the lift. Normally the func-
tion is activated but the function can be disabled with:
The function can be activated with:
8.4.4 Active and passive alarm mode
If alarm mode function is programmed it means the EC II GSM SE can only receive incoming
calls when the alarm mode is active. To activate the alarm mode the following conditions must
be fulfilled:
•
Alarm mode function is programmed
•
A lift alarm has been called out
Note that it is only the delay for activation, which is programmed. The actual
speech connection will need a longer time to establish