Rockwell Automation Sensia Jiskoot InSpec Remote I/O HUB, Инструкция по установке, эксплуатации и обслуживанию

Страница: 31 / 40

InSpec Remote I/O HUB (ATEX, IECEx) Section 11: Inspection & Maintenance
31
OTHER
Before reassembling the enclosure, inspect and clean the machined flanges on the box and cover - surfaces
must be smooth, free of nicks, scratches, dirt or foreign objects. Inspect the cover gasket and ensure that it is
secure and undamaged. If the gasket is damaged, replace with factory-approved gasket and adhesive.
The enclosure shall be operated as intended and only in undamaged and perfect condition.
ATTENTION
Caution!
Handle electronic components and printed circuit card assemblies only when you are
properly grounded in an ESD Protected Area (EPA). You are a source of ESD unless you are
grounded properly.
Modern electronic devices are very sensitive to static electric charges.
Use a grounding wrist strap at all times.
Place all electronic components on a static-dissipative surface or in a static-shielded bag
when they are not in the chassis.
Store and transport ESD-sensitive items in static-shielding containers, such as specially
marked bags or boxes.