Rockwell Automation Sensia Jiskoot InSpec Remote I/O HUB, Инструкция по установке, эксплуатации и обслуживанию

Страница: 27 / 40

InSpec Remote I/O HUB (ATEX, IECEx) Section 9: Instrument Specifications
27
Instrument Specifications
GENERAL SPECIFICATIONS
DESIGN AREA ITEM DESCRIPTION
Physical Size (mm) 440mm x 565mm x 240mm (W x H x D) Approx.
17½” x 22¼” x 9½” (W x H x D) Approx.
Weight 50 kg approx.
Wire Connections Screw Terminals: 22–12 AWG (0.5 to 2.5mm²)
Earth Bus Bar: 22–12 AWG (0.5 to 2.5mm²), 16mm² when cable lug
used.
RIO-xxx Modules & Relay Modules: 24–14 AWG (0.25 to 2.5mm²)
Operating
Environment Equipment Class I
Installation Category II
Pollution Degree 3
1
(Jiskoot Remote I/O Hub only)
Operating Temperature AC Powered: -20°C to +50°C (-4°F to +122°F)
DC Powered: -20°C to +60°C (-4°F to +140°F)
Relative Humidity 80% up to 31°C decreasing linearly to 50% at 40°C
IP Rating IP66
Altitude 2000 metres max. (6562 feet)
Power Supply
Voltage, Frequency AC Powered: 100 to 240 V AC, 50/60 Hz
DC Powered: 24V DC ± 10%
Power Consumption AC Powered: 80 Watts Max. (All options fitted)
DC Powered: 30 Watts Max. (All options fitted)
Remote I/O Modules Quantity 4 max.
Types RIO-DIO : Digital Input/Output Module
RIO-PUL : Pulse/Frequency Input Module
RIO-ANI : Analogue (4-20mA) Input Module
RIO-ANO : Analogue (4-20mA) Output Module
Relay Outputs Quantity 4
Contact Form Solid State Relay – SPST – NO
Installation Category III
Max. Switching Voltage 250V AC, 30V DC
Max. Switching Current 1 Amp
Intrinsically Safe
Interfaces Quantity 2 max.
Types Either 2 Ch. CanWeigh or 2/4 Ch. CanHigh
Communications Quantity 1
Type Either:
Ethernet 10/100 direct wire (100m max.), or
Ethernet SHDSL Extender (15km max.)
1
Pollution Degree 3 – Normally only non-conductive POLLUTION occurs. Occasionally, however, a
temporary conductivity caused by condensation must be expected.