Rockwell Automation Guardmaster 440R-ENETR, Руководство пользователя, Страница: 74 / 86

74 Rockwell Automation Publication 440R-UM009C-EN-P - July 2019
Chapter 9 Explicit Communication
20.
Populate the five fields as shown in Figure 61 to read the ENETR interface
input values and click OK.
Figure 61 - Input Message Configuration
21.
Populate the six fields as shown in Figure 62 to write the ENETR interface
output values and click OK.
Figure 62 - Output Message Configuration
Configuration Data
The Configuration data can occupy an array of up to a maximum of 390 bytes.
Table 20 on page 75 describes the bytes. The Relay ID shows up in the first
six(0…5) bytes. Since the ENETR interface can only monitor a maximum of six
relays, each relay is identified by one byte. Byte 0 is the relay closest to the
ENETR interface (called Slot 1).
Each DG relay can have a maximum of 32 GuardLink taps on each input and
each DG relay as two inputs. Therefore, the Slot 1 GuardLink 1 taps are
identified with bytes 6…37. Each GuardLink circuit occupies 32 bytes.
IMPORTANT See Knowledgebase article 1087826 for additional configuration information:
https://rockwellautomation.custhelp.com/app/answers/detail/a_id/1087826