Rockwell Automation Guardmaster 440R-ENETR, Руководство пользователя, Страница: 32 / 86

32 Rockwell Automation Publication 440R-UM009C-EN-P - July 2019
Chapter 5 Add the AOP to a Studio 5000 Project
6.
Type in the name of the module.
7. Type in a description, if desired (optional).
8.
Type in the IP address.
9. The Module Definition box shows the six safety relays as being undefined.
10.
To specify the safety relays, click Change.
Figure 33 - New Module – General Setup
Figure 34 shows the possible selections for electronic keying.
11.
Select the desired electronic keying.
• Compatible Module: The series letter must be correct, but the revision
level is ignored.
• Disable Keying: The series letter and revision level are not used to
determine if the module is correct.
• Exact Match: Both the series letter and revision level must be correct to
use the module.
Figure 34 - Electronic Keying
IMPORTANT At least one safety relay must be specified.