Rockwell Automation Guardmaster 440R-ENETR, Руководство пользователя, Страница: 49 / 86

Rockwell Automation Publication 440R-UM009C-EN-P - July 2019 49
AOP Controller Tags Chapter 6
RecoverableFault BOOL Recoverable Fault Status – Toggles ON (1) for one scan when the DI/DIS safety relay has detected an unexpected operation.
• S12 OpenWire
• S22 OpenWire
• S32 OpenWire
• S42 OpenWire
• Cross Loop Fault
• Invalid Switch Setting
• Reset Held ON
Toggles back to OFF (0), when the unexpected operation status goes to ON (1)
0 = No fault
1 = Fault
NonRecoverableFault BOOL Nonrecoverable Fault Status – Toggles ON (1) for one scan when the DI/DIS safety relay has detected an unexpected internal
operation or failed a pulse check. Toggles back to OFF (0), when the nonrecoverable fault tags are assigned a value.
See
NonRecoverableFault_A and NonRecoverableFault_B fault tags for values.
0 = No fault
1 = Fault
S12 BOOL S12 Status – Indicates whether terminal S12 of circuit IN01 is ON or OFF.
0 = The terminal is OFF.
1 = The terminal is ON.
S22 BOOL S22 Status – Indicates whether terminal S22 of circuit IN02 is ON or OFF.
0 = The terminal is OFF.
1 = The terminal is ON.
S32 BOOL S32 Status – Indicates whether terminal S32 of circuit IN02 is ON or OFF.
0 = The terminal is OFF.
1 = The terminal is ON.
S42 BOOL S42 Status – Indicates whether terminal S42 of circuit IN02 is ON or OFF.
0 = The terminal is OFF.
1 = The terminal is ON.
L12 BOOL L12 Status – Indicates whether terminal L12 is ON or OFF.
0 = The terminal is OFF.
1 = The terminal is ON.
S34 BOOL S34 Status – Indicates whether terminal S34 is ON or OFF.
0 = The terminal is OFF.
1 = The terminal is ON.
NonRecoverableFault_A SINT Nonrecoverable Fault Processor A – Indicates that Safety Processor A has recorded a nonrecoverable fault. See Table 9 on page 50 for a
list of nonrecoverable fault codes.
NonRecoverableFault_B SINT Nonrecoverable Fault Processor B – Indicates that Safety Processor B has recorded a nonrecoverable fault. See Table 9 on page 50 for a
list of nonrecoverable fault codes.
S12OpenWire BOOL S12 Open Wire - Indicates S12 open (0) and closed (1) while S22 remained closed (1).
S22OpenWire BOOL S22 Open Wire - Indicates S22 open (0) and closed (1) while S12 remained closed (1).
S32OpenWire BOOL S32 Open Wire - Indicates S32 open (0) and closed (1) while S42 remained closed (1).
S42OpenWire BOOL S42 Open Wire - Indicates S42 open (0) and closed (1) while S32 remained closed (1).
CrossLoopFault BOOL Cross Loop Fault – Indicates whether the safety relay has detected a cross loop fault on one of the input circuits.
0 = No fault
1 = Cross loop fault
InvalidSwitchSetting BOOL Invalid Switch Settings – Indicates the switch settings changed after power-up of the safety relay.
0 = No fault
1 = Fault
ResetHeldOn BOOL Reset Held On Fault – Indicates the reset signal ON (1) for longer than the maximum time of 3000 ms.
0 = No fault
1 = Fault
Table 8 - DI and DIS Relay Tags (Tag name prefix: ENETRname:I.Relayx_GSR_DI. or ENETRname:I.Relayx_GSR_DIS.)
Name Data Type Definition