Rockwell Automation Guardmaster 440R-ENETR, Руководство пользователя, Страница: 55 / 86

Rockwell Automation Publication 440R-UM009C-EN-P - July 2019 55
AOP Controller Tags Chapter 6
GateOpenFault BOOL Gate Open Fault - Indicates the Gate inputs, S12, S22, unexpectedly opened.
0 = No Fault
1 = Fault
InvalidSwitchSetting BOOL Invalid Switch Setting Fault – The rotatory switch configuration does not match the configuration that is stored in the safety relay.
LockRequestGateOpenFault BOOL Lock Request/Reset Gate Open Fault - Indicates that the gate was open during a lock or reset request.
0 = No fault
1 = Fault
Overspeed_SL2 BOOL Overspeed SL2 Fault - Indicates that the monitored speed exceeded the configured maximum speed limit settings for SL2 with the
safety gate locked. PWR/Fault indicator is green with red flashing 4X. Reduce the speed to below SL2 and press the reset button to
clear the fault.
0 = No fault
1 = Fault
Overspeed_SL1 BOOL Overspeed SL1 Fault - Indicates that the monitored speed exceeded the configured maximum speed limit settings for SL1 when the
gate is unlocked with Logic setting = 3 or 4. Reduce speed below the SL1 setting and press reset to clear the fault.
0 = No fault
1 = Fault
LockRequestHeldOn BOOL Lock Request Held On Fault – Indicates the lock request signal ON (1) for longer than the maximum time of 3000 ms. The fault is
cleared when the signal is removed.
0 = No fault
1 = Fault
UnLockRequestHeldOn BOOL Unlock Request Held On Fault – Indicates the unlock request signal ON (1) for longer than the maximum time of 3000 ms. The fault
is cleared when the signal is removed.
0 = No fault
1= Fault
Table 13 - GLP Relay Tags (Tag name prefix: ENETRname:I.Relayx_GSR_GLP.)
Name Data Type Definition