Rockwell Automation Allen-Bradley LDAT-S03 Series, Руководство пользователя

Страница: 13 / 76

Rockwell Automation Publication LDAT-UM001A-EN-P - April 2016 13
Before You Begin Chapter 1
Vertical or Incline
Installation A linear thruster driven system that is mounted vertically or on an incline
cannot maintain position when the power is removed. The force of gravity on
the motion platform and its payload causes slider to fall to the low end of travel.
Design engineers must design in controlled power down circuits or mechanical
controls to prevent the linear thruster driven system and their payload from
being damaged when the power fails.
Additional Concerns Read and follow the following statements
IMPORTANT Any person that teaches, operates, maintains, or repairs these linear
thrusters must be trained and demonstrate the competence to perform the
assigned task safely.
ATTENTION: Linear thrusters can have high accelerations, sudden, and fast
motion. Rockwell Automation is not responsible for misuse, or improper
implementation of this equipment.
ATTENTION: Linear thrusters driven systems must have their payload
secured such that it cannot sheer off in the event of an impact in excess of
the bumper ratings.
ATTENTION: The Hall effect module and motor feedback encoder contain
electrostatic discharge (ESD) sensitive devises. Follow static-control
precautions when you install, test, service, or repair these assemblies. If you
do not follow ESD control precautions, components can be damaged. If you
are not familiar with static control precautions, refer to Guarding Against
Electrostatic Damage, publication 8000-4.5.2, or any other applicable ESD
awareness handbook.