Rockwell Automation Allen-Bradley LDAT-S03 Series, Руководство пользователя

Страница: 12 / 76

12 Rockwell Automation Publication LDAT-UM001A-EN-P - April 2016
Chapter 1 Before You Begin
Air Freight Restrictions When air freight is used for a linear motor, special preparations and
precautions must be taken. The following information outlines the basic
requirements at the publication date of this document. However, regulations
are subject to change and more area or carrier restrictions can be imposed.
Always check with your carrier or logistics specialist regarding current local,
regional, and national transportation requirements when shipping this
product.
Linear thruster magnet tracks contain magnetized material, as classified by
International Air Transport Association (IATA) Dangerous Goods
Regulations. An IATA trained individual must be involved when shipping this
product via domestic or international air freight. Packing Instruction 902
provides information regarding the preparation of this product for air
transportation. Follow these general regulations to mark and label containers
to meet requirements, the application of specific Magnetized Material
Handling Labels, and instructions for preparing the Shipper's Declaration for
Dangerous Goods.
As a minimum, refer to the following IATA Dangerous Goods Regulations:
• Subsection 1.5: Training
• Subsection 3.9.2.2: Classification as Magnetized Material
• Subsection 4.2: Identification as UN 2807, Magnetized Material, Class
9, Packing Instruction 902
• Subsection 7.1.5: Marking
• Subsection 7.2: Labeling
• Subsection 7.4.1: Magnetized Material Label
• Section 8: Shipper's Declaration for Dangerous Goods
When shipped via ground in the United States, these products are
not
considered a U.S. D.O.T. Hazardous Material and standard shipping
procedures apply.