Rockwell Automation Allen-Bradley 35E, Руководство пользователя

Страница: 146 / 226

146 Rockwell Automation Publication 35-UM001A-EN-P - May 2022
Chapter 7 Configure the Armor PowerFlex Drive
To edit the SNN, follow these steps.
1. To open the Safety Network Number dialog box, click Edit, (to the right
of the Safety Network Number), in the Device Definition dialog box.
2. Select either Time-based or Number-based.
3. If you select Number-based, enter a value from 1…9999 decimal.
4. Click Set.
5. Click OK to close the Safety Network Number dialog box.
6. Click OK again, to close the Device Definition dialog box.
If needed, the Device Definition dialog box can be reaccessed via the Overview
page.
QuickStart
QuickStart is an optional wizard that allows you to quickly set up the drive and
test the motor. QuickStart is only available if a connection between the Armor
PowerFlex drive and the programmable controller is inhibited.
The QuickStart will launch automatically after the OK button is pressed in the
Device Definition window, when the module is first created. After that, the
QuickStart can be launched independently from the Overview page.
Follow the prompts on the three pages:
• Motor Data
• Direction Test
• Autotune
Data that is written during the QuickStart procedure is immediately saved to
the Armor PowerFlex drive.