Roche Cedex HiRes, Руководство оператора

Страница: 32 / 166

26
Cedex HiRes Analyzer Operator’s Guide
B
B
2 Choosing a Suitable Location
The Cedex HiRes Analyzer is highly sensitive and consists of top-quality electronic and optical components.
To guarantee optimal and reliable performance of the Cedex HiRes Analyzer, select the appropriate location in
accordance with the safety regulations described in the Prologue.
Avoid further transportation of Cedex HiRes Analyzer after the professional installation.
The transportation locks for the scanner must be attached to the inside of the casing before the Cedex
HiRes Analyzer is transported once again. Please contact a Roche Diagnostics GmbH authorized service
technician in such a case. Vibrations or shaking must also be avoided when transporting the analyzer over
short distances and when operating the system. Focus adjustment must be done after transportation (see
“
Automatic Adjustment and Alignment Verifi cation ”).
Injury from heavy loads
The Cedex HiRes Analyzer weight is 29 kg. (63.8 lbs). No attempt should be made by the user to remove or
set up the instrument alone. You may injury your hands, fi ngers, or back when putting the analyzer in place.
2.1 Connecting or disconnecting the device
First connect the device using the power cord to the external power supply. On the power supply is a power
switch. When turned to ON, it is illuminated indicating the power supply is alive. A blue power switch is located
on the front panel of the Cedex HiRes System. When the switch is turned to ON it illuminates, indicating that
the device is alive. In case of problems, turned the device switch to OFF and then switch the power supply to
OFF.
In case of emergency, remove the power line from the Cedex HiRes System immediately.
ON/OFF Switch
Figure 2: The ON/OFF switch for the Cedex HiRes Analyzer
Choosing a Suitable Location
Connecting or disconnecting the device