Roche Cedex Bio, Руководство оператора

Страница: 183 / 496

Roche Diagnostics
Operator’s Manual · Version 3.1 B-53
Cedex Bio System 5 Daily operation
Validating sample results
a
To validate sample results from the results list
1
Choose Workplace > Result Review .
A screen is displayed that lists the results.
If TRL Check is activated, the result might be displayed for example as <0.5, and
the <Test Rng flag is added. This means that the measured value is below the
defined TRL value.
Interpreting flags
e
For detailed information on the flags, see List of flags on page D-28.
Displaying details of a result
2
Select the result.
3
Press to display detailed information on the selected result.
4
Press to close the screen.
The screen with the result list is displayed again.
5
Select a result.
Validating the results The system can be set up to automatically accept results that are not flagged. In
addition, it can be set up to accept results with flags that are marked in an editable
list of flags that should be ignored, which is particularly suitable if the flags are
assessed on the host system anyway.
e
See Result handling on page B-165.
See Editing the acceptable flags list on page B-160.
A
Order number.
B
Status
!: The result has not been accepted yet.
@: The result has not been transmitted yet.
C
Test name.
D
Results.
E
Time when the order was defined.
F
This test was performed again:
->-: Repeated.
-v-: Rerun with dilution.
G
Press to validate the selected result.
H
Press to display certain kinds of results
only (filter).
Figure B-17
B
E
G H
C
A
F
D
o
To check when the result was generated press .
o
For results, that were not generated on the current day, only their date of genera-
tion is displayed. You can look at the results by pressing
.
o
To display context information of the fluids used to arrive at this result, press ,
then on the detail screen press .