ROBWAY RCI-4100, Эксплуатация и установка

Страница: 74 / 187

OPERATION AND INSTALLATION
RCI-4100 SYSTEM
MAN-1111 Rev H ©Copyright 2015 LSI-Robway Pty Ltd Page 74
9.4. Inspection and Test Schedule
Check that Detailed Periodic Visual
1 System or equipment is appropriate to area
classifications A A A
2 Are there any modifications. A S A
3 System group is correct. A S N
4 Equipment temperature class is correct. A S N
5 Equipment or system is clearly marked, and
particularly that any equipment or cable labels
are legible. A S N
6 Equipment or system carries the correct
identification. A S N
7 There are no unauthorised modifications to type
and rating of fuses. A S A
8 Relays are of correct type and without damage. A A A
9 Segregation is maintained between Intrinsically
Safe and Non-Intrinsically Safe circuits in any
junction boxes or similar. A A A
10 Cabling is installed in accordance with the
documentation. A N N
11 Cable screens are earthed in accordance with
the documentation. This may be difficult when
the screens are designed to be terminated
within the cable glands. A S N
12 Earthing is according to the documentation. A A A
13 Earth continuity is satisfactory. A N A
14 Electrical connections are tight. A S N
15 Point to point connections are correct. A N N
16 There is no visible damage to equipment or
cables and there is no undue accumulation of
dust or dirt. Whenever possible, check flame
path for signs of damage. A A A
17 Equipment is adequately protected against
corrosion,
moisture, vibration, excessive
temperature, and other adverse factors.
A A A
18 Installation is in compliance with the
documentation.
A S N
In the above chart, A= All, S= Sample and N= Not required by the standard, but sample is
recommended.