ROBWAY RCI-4100, Эксплуатация и установка

Страница: 122 / 187

DATA LOGGING DESCRIPTION
MAN-1111 Rev H ©Copyright 2015 LSI-Robway Pty Ltd Page 122
The records are printed 1 per line with each field in the record separated by a tab character. This means the
resultant file is a tab de-limited text file which is a suitable format for importing into spreadsheet programs
such as MSExcel.
Downloading of the logger can be performed any number of times without affecting the contents of the
logger.
Erasing Data Logger Information
Erasing of data logger records can be performed at any time by accessing the Function code for "Erasing
Logger Contents."
Erasing the data logger will cause all currently recorded logs to be erased (hence the information can no
longer be downloaded) and it also clears the SWL % counters.
Errors in Logger Data
On powering the display the contents of the data logger is checked in three separate operations. In almost
all cases these checks will all pass OK. If however a check fails, the state of the logger is immediately
questionable. These errors should not occur except in extenuating circumstances. If an error occurs the
following message is displayed in the calibration window “LDATA” If this occurs the user must erase the
logger contents. To erase contents in this event the over-ride key switch must be switched and “Enter”
button pressed until normal display start-up resumes.