Robustel GoRugged M1000 Pro User Guide
RT_M1000 Pro_UG_v01.01
27.12.2011
22 / 59
Confidential
Read
Read gateway’s currently settings.
Write
Save changes into gateway.
Note
: Reboot for changes to take effect.
Default
Set gateway to default factory settings, which will take effect after
clicking “Write” button.
Note:
PIN setting, Phone Book settings and COM settings will not be
restored to factory default.
Reboot
Reboot the gateway.
After rebooting, user should disconnect and re-connect to the RS-232
port again.
Exit
Exit the Modem Configurator.
Disconnecting
Gateway is not communicating with Modem Configurator.
Connecting
Gateway is communicating with Modem Configurator.
Serial
Port
Settings
Show the current RS-232 communication parameter.
Versions
Show the gateway’s current firmware and hardware version.
Important Notice
You must save your parameter changes by clicking “Write” button and then reboot your M1000 by clicking “Reboot”
button to take effect for the parameter changes.
3.2.2
Export and Import Profiles
Users could export gateway settings from one gateway, then import the same settings to other gateways, which
makes it convenient to carry out “mass deployment” and “pre-configuration”.
1.
Select
Export
from the
Settings
menu. Then select a folder and enter the file name for the profile. Click on
Save
,
then it will popup “
Export Succeed
” windows.
