Robustel GoRugged M1000 Pro User Guide
RT_M1000 Pro_UG_v01.01
27.12.2011
15 / 59
Confidential
2.4
Installation the SIM Card
Be sure to insert a SIM card before you use the gateway.
Note
: A SIM card set with PIN code cannot be used normally in the gateway. You need to use Modem Configurator to
unlock the PIN code of the SIM card before using it in the gateway.
Make sure to disconnect the charger and switch off your gateway before inserting or removing your SIM/USIM card.
Inserting SIM Card
1.
Make sure your charger is disconnected.
2.
Use a screwdriver to unscrew the screw on the cover, and then remove the cover, you could find the SIM Card
slot.
3.
Insert the SIM card, and you need press the SIM card with your fingers until you hear “a cracking sound”. Then
use a screwdriver to screw the cover.
Removing SIM card
1.
Make sure your charger is disconnected, and then press and hold down the power key until the
gateway
is
powered off.
2.
Press the SIM card until you hear “a cracking sound”, when the SIM card will pop up to be pulled out.
Note:
1.
Don’t forget screw the cover for again-theft.
2.
Don’t touch the metal surface of the SIM card in case information in the card is lost or destroyed.
3.
Don’t bend or scratch your SIM card. Keep the card away from electricity and magnetism.
4.
Make sure to disconnect the power source from your gateway before inserting and removing your SIM card.
