Robur Caldaria 100.2 Condensing+ export Скачать руководство пользователя

Страница: 2 / 56

This Installation, use and maintenance manual has been drawn up and printed by Robur S.p.A.; whole or partial

reproduction of this Installation, use and maintenance manual is prohibited.
The original is filed at Robur S.p.A.
Any use of this Installation, use and maintenance manual other than for personal consultation must be previously

authorised by Robur S.p.A.
The rights of those who have legitimately filed the registered trademarks contained within this publication are not

affected.
With the aim of continuously improving the quality of its products, Robur S.p.A. reserves the right to modify the

data and contents of this Installation, use and maintenance manual without prior notice.

Revision: B
Code: D-LBR875EN

DISPOSAL

The appliance and all its accessories must be disposed of separately in accordance with the regulations in force.

Use of the WEEE symbol (Waste Electrical and Electronic Equipment) indicates that this product cannot be disposed of as household waste.

Proper disposal of this product helps to prevent potential negative consequences for the environment and human health.

Содержание Caldaria 100.2 Condensing+ export

























































Результаты поиска

Содержание Caldaria 100.2 Condensing+ export

Отзывы:

Похожие инструкции для Caldaria 100.2 Condensing+ export

Бренды по названию

Популярные бренды

Robur Caldaria 100.2 Condensing+ export, Инструкция по установке, эксплуатации и обслуживанию

Результаты поиска

Содержание Caldaria 100.2 Condensing+ export

Отзывы:

Похожие инструкции для Caldaria 100.2 Condensing+ export

Бренды по названию

Популярные бренды