Robotronics Vehicle Robot, Руководство по эксплуатации

Страница: 49 / 81

45
Fabric and Fur Care
General maintenance of your robot should include caring for the robot’s fur. After each use,
clean and brush the robot’s fur and clothing so the oils and dirt do not become permanent. This
may be done with a cloth or brush. Keep the robot covered when not in use to keep dust and
dirt off and to protect the fur and clothing. A good idea is to have two people operate the robot,
one to operate it and the second to help people interface with the robot. This person can
protect the robot from sticky fingers, dirty shoes, ball point pens, etc. This person can pass out
stickers, coloring books and help give your safety presentation. The following is a list of specific
ways to care for the fur:
•
Brush the fur regularly with a soft brush, or white terry cloth towel to avoid matting over time.
This will help to keep it clean and looking fresh and new. Be careful to be gentle, excess
friction may cause excess wear.
•
For regular cleaning maintenance use a damp soft cloth and warm water. A drop or two of
mild liquid detergent in the warm water before applying it with a damp cloth should remove
most skin oils and other dirt buildup.
•
You can use a fabric cleaner such as 303 Fabric/Vinyl cleaner. You can purchase this from
an automotive store. You can also use Woolite mixed with water. To get the fur fluffed up
again brush it or use clean compressed air to blow across the fur.
•
The body fur with the paws can be cleaned in a washing machine and dried on warm in the
dryer. The jacket can be cleaned the same way.
•
Do not get the robot wet!