For support, please login on our forum support.zorabots.be or send an e-mail to [email protected]
Look for a nice spot for your Billy-Billy.
Step 1
Step 3
Step 2
V2.1
Step 4
Quick guide EN
If Billy-Billy understood you,
the cheeks will turn purple and
he will tell you the time.
Connect the power plug
and softly press the on/o
ff
switch to start up your
Billy-Billy.
Billy-Billy's cheeks will stay red during
the start up. This takes about 1 minute.
When Billy-Billy is ready for use he will ask
you in English, Dutch and French which
language you prefer. Do not reply if the
heard language is not the one you want.
The next language will follow. The robot will
reboot after you con
fi
rmed the language.
Perform the following steps to connect
Billy-Billy to a wi
fi
network:
Use ZBOS Control to create a
fi
le with the
information for the wi
fi
network.
Surf to the website https://control.zorabots.be/
using your browser.
Tap the option 'WiFi setup'
and enter the information
for your wi
fi
network
(1)
and
download the
fi
le
(2)
Copy the downloaded
fi
le
to a usb-drive.
Insert the usb-drive into
a usb slot at the
back of Billy-billy.
Say 'OK Billy-Billy' to make Billy start listening
and then state the command 'connect to wi
fi
'
to connect Billy-Billy to the wi
fi
network.
2
11
Step 5
Link Billy-Billy to the ZBOS Control app.
Scan a code below to install the app on your
smartphone or tablet.
For more information on using the app,
please refer to the manual on the website
https://docs.zorabots.be.
After restarting, when the
cheeks turn green Billy-Billy
will let you know that the start-
up is completed and will speak
and understand English.
Once Billy-Billy is restarted and says he
is ready for use, you can for instance ask
Billy-Billy what time it is. This is done by
saying “Billy-Billy”
fi
rst and waiting until his
cheeks turn blue. After that you can ask:
"What time is it?".
