1
802.11g Wireless Turbo PCI Adapter Installation
Prepare for installation
Note:
Your product number is USR5416. It is very important that you have your serial num-
ber written down before you install the 802.11g Wireless Turbo PCI Adapter. You can find
your serial number on the label of the 802.11g Wireless Turbo PCI Adapter and on the side
of the package. If you ever need to contact our Technical Support department, you will need this
number to receive assistance.
Note:
Be sure to find out what letter your CD-ROM drive uses before you begin installing
your new product. You will need to know this to properly install your software.
Note:
During the Installation procedure, you may be prompted for your Windows Operat-
ing system CD-ROM. Make sure you have it available in case you need it.
Step One: Install your software and drivers
Turn on your computer. Insert the Installation CD-ROM into
your CD-ROM drive.
Note:
If your CD-ROM does not automatically launch,
click Windows
Start
,
Run
, type
D:\setup
(if your CD-
ROM drive uses a different letter, type that letter in
place of "D"), and click
OK
.
The Installation CD Graphic User Interface (GUI) will appear on your screen. If prompted, select
your preferred language.
Some files will be copied to your system, and then you will be asked to read the license agree-
ment. Read the agreement and click
Yes
. Select your product and then click
Software
.
Note:
You will need to install this Installation CD-ROM on all the PCs you plan to wirelessly
network together.
Click
Wireless Card Utility and Drivers
. Follow the on-screen instructions. When you are
prompted to restart your computer, select
No, I will restart my computer later
and click
Finish
.
Close the Installation CD-ROM Graphic User Interface (GUI). When your desktop returns, shut
down your computer.