6
I am unable to establish a wireless connection with my 802.11g Wireless Turbo PCI Adapter.
Possible Solution:
Verify that the 802.11g Wireless Turbo PCI Adapter is properly installed. If you continue to experi-
ence problems, uninstall the 802.11g Wireless Turbo PCI Adapter and repeat the installation pro-
cedure.
Possible Solution:
If you are attempting a peer-to-peer connection, verify that each wireless adapter is set to 802.11
Adhoc mode. If you are using a Wireless Access Point, verify that each wireless adapter is set to
Infrastructure mode.
My 802.11g Wireless Turbo PCI Adapter does not see my Access Point in the list when I scan for
it.
Possible Solution:
If you create a wireless connection with the 802.11g Wireless Turbo PCI Adapter but are experienc-
ing poor link quality, check the positioning of the 802.11g Wireless Turbo PCI Adapter. Long dis-
tances, multiple floors, or steel or concrete walls can diminish the link quality. If possible,
reposition the 802.11g Wireless Turbo PCI Adapter to reduce the effect of any of these obstacles.
In addition, check any physical connections between the Access Point and your modem, router,
hub, LAN, or switch.
Possible Solution:
If your Access Point is not broadcasting an SSID, it will not appear during a scan by your 802.11g
Wireless Turbo PCI Adapter. The client will need to be manually configured.
I accidentally clicked Cancel during the software installation procedure for the 802.11g Wire-
less Turbo PCI Adapter.
Possible Solution:
Remove and reinsert the Installation CD-ROM into your CD-ROM drive. Repeat Step 1 in the instal-
lation procedure.
The software installation procedure did not begin when I inserted the Installation CD-ROM.
Possible Solution:
Some programs may keep the autolaunch feature of the Installation CD-ROM from beginning.
Close any open applications and reinsert the Installation CD-ROM. If the Installation CD-ROM
interface does not run automatically, click Windows Start and then click Run. In the “Run” dialog
box, type D:\setup.exe. If your CD-ROM drive uses a different letter, type that letter in place of
“D.”
The 802.11g Wireless Turbo PCI Adapter cannot communicate with other computers linked via
Wireless in the Infrastructure configuration.
Possible Solution:
• Ensure that each computer in the wireless network is powered on.
• Ensure that each 802.11g Wireless Turbo PCI Adapter is configured on the same operating radio
channel. If the IDs are different, change each 802.11g Wireless Turbo PCI Adapter within the LAN
