Chapter 4
LOAD AND TRANSPORT INSTRUCTIONS
-
15
-
English
C42
4151
100.fm
ID
M
4.3.
TRANSPORT AND HANDLING
Transport, also according to the desti-
nation, can be performed by different
vehicles.
The diagram represents the most popu-
lar solutions.
During transport, in order to avoid inop-
portune movement, adequately secure
the load to the transportation vehicle.
Information
For further transportation, recreate
the initial packaging conditions for
transport and handling.
4.4.
INSTALLATION ENVIRONMENT CHARACTERISTICS
Careful consideration must be given to
the place where the machine is to be in-
stalled, in order to ensure that it may be
easily operated, without creating any
unnecessary risks for personnel.
Therefore we suggest the following pre-
requisites:
–
a room temperature
of between
+0°C and 40°c
–
a suitably aired place
so that when
the machine is working, the degree
of humidity is not unpleasantly high/
low from the point of view of the
operator
–
a sufficient lighting
in order that a
pleasant, relaxing working
environment is created for the
operator
–
a boundary area
around the
immediate working area, for safety reasons, as
shown in figure
–
a flat surface
, steady and without vibrations with
adequate weight supporting capacity, also in
consideration of the palletised loads to be wrapped.
Danger - Warning
Use of this machine in explosive environments or
when exposed to the elements is strictly
forbidden.
IDM-2412660450.tif
IDM-2412370080.tif
