Chapter 6
INFORMATION ON USE
-
29
-
English
C62
4151
100.fm
ID
M
6.13. STARTING AND STOPPING THE CYCLE
Single and double wrapping cycle
Proceed as indicated.
1 -Position the sensing arm wheel onto
the pallet.
2 -Make the film adhere to the load.
3 -Press the "Cycle start" push-button
(1a)
. The machine performs a cycle
and stops automatically.
4 -Cut the film.
If the automatic cut optional unit is
provided on the machine, this
operation will be performed
automatically.
5 -Move the machine to perform a new
wrapping cycle (see § 6.12.).
Top sheet cycle
Proceed as indicated.
1 -Position the sensing arm wheel onto
the pallet.
2 -Make the film adhere to the load.
3 -Press the "Cycle start" button
(1a)
.
The machine performs an upward
wrap and stops after reaching the
upper end.
4 -Deposit the film on top of the load.
5 -Press the "Cycle start" button
(1a)
.
The machine will restart the
wrapping cycle until it is definitively
completed.
6 -Cut the film.
If the automatic cut optional unit is
provided on the machine, this
operation will be performed
automatically.
7 -Move the machine to perform a new wrapping
cycle (see § 6.12.).
IDM-24126601501.tif
1a
IDM-24126601900.tif
